1. STANDARD 1/4" TO 3/8" BARB AND 1/4" TO 1/2" BARB FITTINGS Fitting material: chrome plated brass Thread: 1/4" BSPP (G1/4) Barb size: 1/2" or 3/8" depending on model Seal: o-ring; this design necessitates an o-ring groove in the mating part Groove design: 16 to 16.5 mm OD x 1.5 to 1.75mm Depth O-ring material: Buna-N Compatibility with other Swiftech products: Thread compatibility general information link - All Swiftech water-blocks using the NPSM standard, such as Apogee, Apogee GT, MCW60, MCW30, are compatible with these fittings. 2. SPECIAL 1/4" BSPP TO 1/2" BARB RES PORT FITTING FOR MCRES-MICRO REV2 This high-polish chrome plated brass 1/2" barb fitting is specially designed (tall body) to fit inside of the fill-port or alternate outlet cavity of the MCRES Micro Rev 2 and to facilitate the use of a 5/8" socket to fasten the fitting. 1/4" BSPP-1/2" RPF Fitting material: high polish chrome plated brass Thread: 1/4" BSPP (G1/4) Barb size: 1/2" Seal: o-ring; this design necessitates an o-ring groove in the mating part Groove design: 16 to 16.5 mm OD x 1.5 to 1.75mm Depth O-ring material: Buna-N 3. 1/4" BSPP TO 1/2" BARB FILL-PORT FITTINGS 1/2" RFP-AL Black anodized aluminum body 1/2" RFP-CPB High polish chrome plated brass body These panel-mount 1/2" remote fill-port fitting allows users to fill-up or refill their system from outside of the PC, or alternatively be used as a drain; the fitting connects with 1/2" tubing to either the MCRES Micro Res port barb fitting or to a T-Line. Two models are available, black anodized aluminum body, or high polish chrome plated brass body. The high-polish chrome plated brass plug conveniently protrudes from the flange of the fitting for frequent access, and can be fastened either with a flat screw driver or a 5/8 socket. A standard 5/8" bimetal hole saw is all it takes to drill the panel and install the fitting. Female thread: 1/4" BSPP (G1/4) 4. 1/4" BSPP PLUG 1/4"BSPP-P This high-polish chrome plated brass fitting offers elegance with convenience thanks to its wide slot and 5/8" hex nut. Fitting material: High polish chrome plated brass Thread: 1/4" BSPP (G1/4) Seal: o-ring; this design necessitates an o-ring groove in the mating part Groove design: 16 to 16.5 mm OD x 1.5 to 1.75mm Depth O-ring material: Buna-N 5. 1/4" BSPP TO 1/2" SHORT BARB FITTING This high-polish chrome plated brass 1/2" barb fitting is specially designed with a shortened barb and body to provide clearance to the MCR-QP Stackable series of radiators. part # BSPP-250-500-CP-SHORT Fitting material: High polish chrome plated brass Thread: 1/4" BSPP (G1/4) Barb size: 1/2" Seal: o-ring; this design necessitates an o-ring groove in the mating part Groove design: 16 to 16.5 mm OD x 1.5 to 1.75mm Depth O-ring material: Buna-N 6. 1/4" BSPP TO 3/8" BARB - EUROSTYLE These high-polish chrome plated brass barb fittings feature a captive o-ring. This design requires a flat mating surface, and thus does not necessitate the presence of an o-ring groove in the mating part surface to make the seal. The overall barb & body length is shorter than usual, in order to provide sufficient clearance between VGA water-blocks in triple SLI configurations. Part # BSPP-250-375-CP-EURO Fitting material: High polish chrome plated brass Thread: 1/4" BSPP (G1/4) Barb size: 3/8" Seal: captive o-ring O-ring material: Buna-N 7. 1/4" BSPP TO 1/2 " BARB - EUROSTYLE These high-polish chrome plated brass barb fittings feature a captive o-ring. This design requires a flat mating surface, and thus does not necessitate the presence of an o-ring groove in the mating part surface to make the seal. The overall barb & body length is shorter than usual, in order to provide sufficient clearance between VGA water-blocks in triple SLI configurations. Part # BSPP-250-500-CP-EURO Fitting material: High polish chrome plated brass Thread: 1/4" BSPP (G1/4) Barb size: 1/2 " Seal: captive o-ring O-ring material: Buna-N

MSRP & Parts Please consult your Swiftech distributor prior to ordering direct from us, or purchase the product factory direct here BSPP CHROME PLATED FITTINGS Part # Description Price BSPP-250-375-CP 1/4" BSPP X 3/8" Barb Chrome Plated fittings, including o-ring, set of 2 fittings $5.00 BSPP-250-500-CP 1/4" BSPP X 1/2" Barb Chrome Plated fittings, including o-ring, set of 2 fittings $5.00 1/4" BSPP-1/2" RPF (1) High Polish chrome plated brass Res port fitting, hose clamp $5.95 1/2" FPF-AL 1/2" Remote fill-port fitting, Aluminum including: 1) black anodized aluminum fitting (1) plug (1) low profile nut hose clamp $7.50 1/2" FPF-CPB 1/2" Remote fill-port fitting, Brass including; (1) high polish chrome plated brass fitting (1) plug (1) low profile nut hose clamp $9.95 1/4"BSPP-P 1/4" BSPP plug and o-ring $1.80 BSPP-250-500-CP-SHORT Set of (4) Chrome plated fittings 1/4 in. BSPP x 1/2" SHORT barb, with o-rings $10.00 BSPP-250-375-CP-EURO 1/4" BSPP X 3/8 " Barb Chrome Plated fittings with captive o-ring, short body, set of 2 fittings $5.00 BSPP-250-500-CP-EURO 1/4" BSPP X 1/2 " Barb Chrome Plated fittings with captive o-ring, short body, set of 2 fittings $5.00

Back to top